Concrete Resurfacing – More FAQ’s..

It is very common to see that your driveway, that was a ravishing concrete beauty not too long ago, is now all cracked and faded. Basically, your driveway has transformed into a sight that you will not like to see. The wear and tear is essentially as a result of extreme temperatures, rain, pollution and weight of the vehicles driving through it. So what are the options in cases like this?

To begin with, the initial option that comes to the majority of of our own minds is always to reconstruct the complete driveway. However, that will cost you lots of money. Instead, you are able to consider possible ways by which you may repair just the damaged area of the concrete driveway and save cash. Thankfully, through the help of Concrete Resurfacing you may get the ravishing concrete look back and save approximately 50% of the sum total that you simply could have otherwise put in reconstructing the driveway. By getting a reliable and affordable service provider, you can get your driveway resurfaced easily.

Over time you are likely to realize that your concrete driveway develops cracks within it, this is largely caused by the weather as well as the wear and tear of driving into it. Previously when you got cracks inside your driveway the best way to repair them was to rip it and pour a brand new surface. This may not be necessary any more as the cracks can be filled as well as the driveway resurfaced with ease. This is a job that you must be able to do on your own which will help towards the keep the cost down.

The very first thing you are likely to wish to accomplish in order to resurface your driveway is to ensure that you clean it. The driveway has to be clean to ensure the resurfacing to work. Using a pressure washer is the easiest method to make sure that you have it clean. For those who have any oil stains on your driveway you need to use a degreasing agent to obtain them off. Additionally it is essential that you clean the cracks that you simply want to fill. Scrape them out as best you are able to and then pour a small amount of bleach into the crack. After about ten minutes take your pressure washer and spray the cracks out.

In order to fill the cracks you will wish to use a concrete dressing. For small cracks use a putty knife to force the dressing down into the crack, for larger ones you will see that a caulking gun works better. In any case once the cracks happen to be filled make use of a putty knife to smooth out your dressing.

Once the cracks are filled you are going to have to cover the increase joints. They are the lines that divide the concrete of your driveway into sections. They may be there in order that the concrete can expand and contract because the weather changes. You must make sure that these expansion joints stay in place so you should cover them with duct tape.

The next step is to blend the concrete dressing; you will want to follow the instructions on the bag for that. You will need somebody that will help you unless you are doing just a very small area. The concrete has to be mixed in small batches and applied quickly. For a driveway you need to have a single person applying the concrete dressing as the other is mixing another batch. You want to have the entire driveway covered before the dressing starts to dry.

To be able to spread the concrete dressing you will want to pour it to the slab and then spread it all out. In case you are doing only a small area the easiest method to do it is by using a trowel, for large areas an extended handled squeegee is the greatest bet. Either way make certain you push down hard to enable you to get the concrete dressing into all of the crevices, this can ensure that you have a nice smooth surface.

When you find yourself resurfacing a driveway you don’t want the concrete to become smooth, your driveway needs to have texture to it. The way one does this really is to consider a bristle push broom and pull it across the concrete dressing even though it is qvxvvv wet. This may make sure that you get yourself a textured surface that will be slip resistant.

The final thing that you will need to accomplish would be to take away the duct tape that you had within the expansion joints. You will want to stay off of the driveway for the following six hours as the dressing dries. After 24 hours you will need to be put a sealant on the driveway to guard it.

Resurfacing a concrete driveway is not a particularly challenging to task but you do have to work quickly. You will want somebody to assist you however it is a great project for any homeowner to perform themselves. The cost to resurface a concrete driveway has become quite low also it can really improve the appearance of your property.

Leave a comment

Your email address will not be published. Required fields are marked *

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.